EAEU / CU TR Certificate forms

Note: Here is CU TR / EAC certificate basic form with explanation fields available in .pdf format.

EAEU / CU General terms of Technical regulation

The table below shows the general rules of EAC mark or EAEU | CU Technical Reglaments that's  applicable for  low voltage equipment. No direct recognition of any other overseas certificates, declarations, test reports and factory inspections in Russia but our partner labs can reissue CB/CE report in accordance with CU requirements without retesting if it’s based on harmonized IEC/ISO norms.

Authority

Eurasian commission (Custom Union commission formerly) publishes Technical Regulations (reglaments), list of standards applicable for regulations and certification and declaration scheme to approve equipment and goods http://eurasiancommission.org.

On-line registers

All approvals issued in Russia and their status are available on-line at federal register

EAEU | CU TR applicable to Low Voltage Equipment
  • TR CU 004/2011 «LVE safety»
  • TR CU 020/2011 «EMC requirements»
  • TR CU 010/2011 «Machinery safety» for electrical tools

Scope of regulation is specified by Article 1 and attachments to CU TRs and it shows what equipment categories  are object of regulations and schemes and procedures to approve them. HS-code is never used as criterion for obligatory certification or declaration.

EAC marking procedure

Declaration and certification.
Factory inspection is required for serial certification procedure only.

Applicant

Local company is registered at member-country only

Certification EAC mark

Voluntary approvals

No voluntary approvals in CU TR scope at all. For example, a rechargeable battery is outside of any CU TR / EAEU regulations. It means you never obtain, even voluntary, any document of compliance to mark it by EAC-mark. You should declare the battery in accordance with national regulation and mark it by PCT-sign for Russian market.

Language

Russian obligatory. All other languages are regulated by member-countries legislation.

Technical and import (customs clearance) cross-regulation

As it was mentioned earlier HS-code is never used as criterion of classification for obligatory certification or declaration. Nevertheless there are two customs regulations that specifies what approval — certificate or declaration depending on HS-code should be submitted to clear customs.

In reality the example below demonstrates that you should use CU TR rule preferably to choose what document — CU TR / EAEU certificate or declaration should be issued for specific equipment. Power supply to charge notebook and power supply for telecom equipment has the same HS-code 8504 40 300 9. The first of them should be certified but other one — declared.

hs code